1. Fan & Shroud Assemblies Offers
  2. sku: 5954965313727613
  3. PARTSMARKETS PMT844086S01

PARTSMARKETS PMT844086S01 Radiator Cooling Fan Condenser A/c

fits model: F-150, Expedition. make: Ford. year: 2018–2019.

Pmt844086s01 Partsmarkets For 2017-2020 Ford F-150 18-19 Expedition A/c Radiator Cooling Fan And Condenser

( Brand: Partsmarkets ), ( Manufacturer Part Number: PMT844086S01 ), ( Manufacturer Warranty: 1 Year ), ( Product Type: 1 Cooling Fan And 1 Condenser ), ( Oe/oem Part Number: Car Engine Condenser And Cooling Fan ), ( Placement On Vehicle Fan : Driver Passenger Side/lh Rh ), ( Fitment: Direct Replacement ), ( Type: Dual Fans ), ( Core Material Condenser : Aluminum ), ( Tank Material Condenser : Alimunum ), ( Condenser Core Type: Parallel Flow ), ( Inlet Fitting Design Condenser : Block Fitting ), ( Transmission Oil Cooler Included: No ), ( Towing Package: Yes )

Review PARTSMARKETS 2017 2020 Ford A/c Radiator Cooling Fan And Condenser fits EXPEDITION F-150 2018–2019

The PartsMarket PMT844086S01 is a premium quality air conditioning radiator cooling fan condenser designed specifically for select 2017-2020 Ford F-150 and Expedition models. This essential component is responsible for circulating coolant through the radiator, ensuring optimal engine temperature and efficient cooling performance.

Manufactured with high-grade materials, this condenser is built to withstand the rigors of daily driving, off-road adventures, and extreme weather conditions. Its durable design includes a robust core structure that enhances heat transfer capabilities, allowing the system to maintain a consistent temperature even under heavy loads.

The PMT844086S01 features an advanced finish on its tubes, which helps to prevent corrosion and maintain the integrity of the cooling system. The condenser is also equipped with a sleek, aerodynamic design that minimizes airflow disruption, optimizing cooling efficiency and reducing drag for improved fuel economy.

This condenser comes with all necessary mounting hardware for a hassle-free installation process. It is engineered to fit perfectly into your Ford F-150 or Expedition, ensuring a secure and stable fit that eliminates vibrations and unwanted noises.

By upgrading your cooling system with the PartsMarket PMT844086S01, you can enjoy a more comfortable driving experience, improved engine performance, and increased reliability. This high-performance condenser is the perfect solution for those who demand the best from their Ford F-150 or Expedition, whether for work or play.

So if you're looking to enhance the cooling capabilities of your Ford F-150 or Expedition, trust the experts at PartsMarket to deliver a top-tier solution that exceeds your expectations. Invest in the PMT844086S01 and experience the difference a premium cooling component can make.

The PMT844086S01 part is a radiator cooling fan condenser for certain 2017-2020 Ford F-150 and Expedition models. Replacing this component can have both advantages and disadvantages.

Pros:

1. Improved Cooling Efficiency: A new radiator cooling fan condenser can enhance the cooling system's performance, ensuring that your vehicle operates efficiently and effectively in various weather conditions.

2. Enhanced Reliability: By replacing the faulty component, you can prevent potential issues with the cooling system, reducing the risk of breakdowns or overheating.

3. Increased Safety: A malfunctioning cooling system can lead to a variety of safety concerns, including engine damage or even a potential fire hazard. Replacing the faulty component can help alleviate these risks.

Cons:

1. Cost: The cost of purchasing and installing a new radiator cooling fan condenser can be significant. You will need to factor in the cost of the part itself, as well as the labor fees for installation if you choose not to do it yourself.

2. Time Investment: Replacing the radiator cooling fan condenser can be a labor-intensive process, especially if you decide to do it yourself. You will need to gather the necessary tools and take the time to remove the old component and install the new one.

3. Potential for Additional Repairs: In some cases, a faulty radiator cooling fan condenser may be a symptom of a larger issue with the cooling system. Replacing the condenser may only be a temporary solution, and you may need to address additional repairs down the line.

Ending Conclusion:

While replacing a radiator cooling fan condenser for a 2017-2020 Ford F-150 or Expedition can come with some drawbacks, the benefits often outweigh the costs. Improved cooling efficiency, enhanced reliability, and increased safety are all compelling reasons to consider this repair. However, it's essential to carefully consider the costs and time investment involved before making a decision.

Recommendation:

If your vehicle is experiencing issues with the cooling system, it's a good idea to have the radiator cooling fan condenser inspected by a professional mechanic. They can help diagnose the root cause of the problem and provide you with an accurate estimate of the cost and time required for any necessary repairs. This will enable you to make an informed decision based on your budget and priorities.

Details:

Physically remove the unit from concrete pad and safely dispose of it. As to the fan motor itself, remove it from housing using a screwdriver. Perform a test that determines if the problem is with condenser or other AC component. A technician will determine whether the unit can be repaired or must replaced.

A damaged radiator cooling fan is a determining factor in preventing your car from overheating. Locating the radiator cooling fan is first step in replacing it. Under the engine and radiator is a sticking cylinder that encased in small casing. For 2017 2020 Ford F-150 18-19 Expedition A/C Radiator Cooling Fan and Condenser Fitment.

To replace the AC Condenser. Using a crescent wrench, remove the four screws located at each corner of fan housing. Turn off the power supply to AC at breaker panel, and then unplug unit. Hold the housing firmly and lift it off your engine compartment.

Be careful in removing the fan housing to avoid damaging it. Install the new fan motor into housing. Charge the refrigerant, which is likely to be an Eco-friendly type like R- 410a . The radiator cooling fan is attached at the back of through a mounting frame.

Steps to Replacing an AC Condenser. 2018 2019 Ford Expedition 2017 2020 F Lincoln Navigator. While a motor can be replaced, most other components cannot. Turn off your car and allow it to cool.

Place the fan housing on a clutter-free working table. Find the connector of wires from your engine and radiator fan motor disconnect it. Restore power and test the air conditioner, examining start up process how well it cools space. Remove the fasteners at sides of fan housing as well.

With a screwdriver, loosen the fan blade and slide if off its shaft. You just learned how to replace your radiator cooling fan as well motor. Return the fan housing back into its proper place and secure screws fasteners. Step 1: Locate the Radiator Cooling Fan.

On the fan motor is an electric cable running towards engine. Clamp the coolant lines, disconnect them, and cut them from condenser unit. The fan blade is either pinned or screwed to a shaft. Slide your replacement radiator cooling fan into the shaft, insert keeper and secure new place.

Remove and discard the coolant per latest standards. The radiator cooling fan does this by either pulling or pushing air into the keeping temperatures within safe levels. Install the new one in its place, soldering coolant lines, removing clamps, and applying a vacuum to clear air from lines.

part #: pmt844086s01 price

  • $281.49

specifications shroudshell:

  • for models: F-150, Expedition
  • for makes: Ford
  • for years: 2018-2019
  • brand: Partsmarkets
  • manufacturer part number: PMT844086S01
  • manufacturer warranty: 1 Year
  • product type: 1 Cooling Fan And 1 Condenser
  • oe/oem part number: Car Engine Condenser And Cooling Fan
  • placement on vehicle fan : Driver Passenger Side/lh Rh
  • fitment: Direct Replacement
  • type: Dual Fans
  • core material condenser : Aluminum
  • tank material condenser : Alimunum
  • condenser core type: Parallel Flow
  • inlet fitting design condenser : Block Fitting
  • transmission oil cooler included: No
  • towing package: Yes

seller shroudshell:

  • # reviews: 24225
  • city: Ontario, California
  • rating: 99.0%

offer shroudshell:

  • availability: In Stock
  • quantity: 5
  • options: Ship-to-home
  • started: April 27, 2025
  • sold: 0
  • best offers: True

shipping shroudshell:

  • carrier: FedEx
  • type: Fixed
  • transit: 4-8 Days
  • service: FedEx Ground Economy
  • cost: $0.00
  • class: Economy

returns shroudshell:

  • policy: Returns Accepted
  • time: 30 Days
  • paid by: Seller

general shroudshell:

  • Car Truck Parts Accessories > Engine Cooling Components > Fan Shroud Assemblies
  • condition: New

payments shroudshell:

  • credit card: Diners-club
  • wallet: Google-pay
  • other
for models: f-150, expedition, for makes: ford, for years: 2018-2019, manufacturer warranty: 1 year, product type: 1 cooling fan and 1 condenser, oe/oem part number: car engine condenser and cooling fan, placement on vehicle fan: driver passenger side/lh rh, fitment: direct replacement, type: dual fans, core material condenser: aluminum, tank material condenser: alimunum, condenser core type: parallel flow, inlet fitting design condenser: block fitting, transmission oil cooler included: no, towing package: yes,
category: auto parts > car truck parts accessories > engine cooling components > fan shroud assemblies, sku: 5954965313727613,

Partsmarkets PMT844086S01 Is Similar To:

shroudshell logo
1 offer $281.49 USD
  • New. Offer #1 priced at $281.49 + $0.00 delivery = $281.49* total. To replace the AC Condenser . Fitment: 2018-2019 Ford Expedition 2017-2020 Ford F-150 2018-2020 Lincoln Navigator Steps to Replacing an AC Condenser A technician will determine whether the unit can be repaired or must be replaced.FREE SHIPPING

Copyright © shroudshell.com