1. Fan & Shroud Assemblies Offers
  2. sku: 9929262767202752
  3. IGNITION IG848329CO

IGNITION IG848329CO Cooling Fan Radiator Condenser 1.8L

fits model: Corolla. make: Toyota. year: 2014–2015.

Ig848329co Ignition Cooling Fan And Radiator Condenser Assembly For 2014-2015 Toyota Corolla 1.8l

( Brand: Ignition ), ( Manufacturer Part Number: IG848329CO ), ( Fitment Type: Direct Replacement ), ( Manufacturer Warranty: 1 Year ), ( Custom Bundle: No ), ( Placement On Vehicle: Front ), ( Type: Cooling Fan And Radiator Condenser ), ( Listing Include: 1x Cooling Fan, 1x Radiator, 1x Condenser ), ( Voltage: 12v ), ( Fan Type: Radiator Cooling Fan Assembly ), ( Fan Placement On Vehicle: Driver Side/lh ), ( Radiator Height Inch : 31.6365 ), ( Radiator Width Inch : 19.4535 ), ( Radiator Thickness Inch : 6.288 ), ( Condenser Height Inch : 24.7244094488189 ), ( Condenser Width Inch : 15.2755905511811 ), ( Condenser Thickness Inch : 0.62992125984252 ), ( Condenser Material: Aluminum ), ( Radiator Tank Material: Plastic ), ( Radiator Weight Lbs : 3.32kg ), ( Transmission Inlet Fitting Design Condenser : Block ), ( Radiator Core Type: Crossflow ), ( Condenser Core Type: Parallel Flow Condenser ), ( Condneser Inlet Diameter: 0.61 ), ( Radiator Inlet Diameter: 1.375 ), ( Condenser Outlet Diameter: 0.4 )

Review IGNITION Cooling Fan And Radiator Condenser Assembly Toyota 1.8l fits COROLLA 2014–2015

Introducing the Ignition IG848329 CO cooling fan radiator condenser, specifically designed for the 2014-2015 Toyota Corolla models equipped with a 1.8L engine. This top-tier cooling component is an essential upgrade for maintaining optimal engine performance and ensuring the longevity of your vehicle.

The radiator condenser, a crucial part of your cooling system, effectively exchanges heat between the coolant and the outside air. This Ignition IG848329 CO model boasts an advanced design, featuring a compact yet robust construction that maximizes cooling efficiency. Its sleek, modern appearance not only enhances the look of your Toyota Corolla but also ensures superior cooling capabilities.

Manufactured from high-quality materials, this cooling fan radiator condenser offers unmatched durability. Its thick, sturdy core is designed to withstand the rigors of daily driving, while its corrosion-resistant finish safeguards it against the damaging effects of the elements. The condenser's robust fan blades ensure consistent airflow, ensuring that your engine remains cool even during the most demanding driving conditions.

Installation of the Ignition IG848329 CO cooling fan radiator condenser is a breeze. This component is engineered to fit seamlessly into your Toyota Corolla's cooling system, requiring no modifications or additional parts. Its plug-and-play design ensures a hassle-free installation process, saving you time and money.

By upgrading your Toyota Corolla's cooling system with the Ignition IG848329 CO cooling fan radiator condenser, you can enjoy the peace of mind that comes with improved engine performance and enhanced reliability. This cooling component is an investment in the long-term health of your vehicle, ensuring that it continues to run smoothly and efficiently for thousands of miles to come. Upgrade today and experience the difference that a high-quality cooling system can make!

Buying a new cooling fan radiator condenser (CNF) for a 2014-2015 Toyota Corolla 1.8L engine can be a necessary expense if the original part is damaged or no longer functioning effectively. Here are some pros and cons to consider before making a purchase:

Pros:

1. Improved cooling system: A new CNF ensures efficient cooling, preventing overheating and potential engine damage.

2. Enhanced performance: A properly functioning cooling system can lead to improved engine performance and fuel economy.

3. Peace of mind: Replacing a faulty CNF with a new one guarantees that your vehicle is safe to drive and reduces the risk of potential breakdowns.

4. Availability: New OEM (original equipment manufacturer) and aftermarket CNFs are readily available from various suppliers, making it easy to find a replacement.

Cons:

1. Cost: New CNFs can be expensive, especially for OEM parts. Aftermarket options may be more affordable but could potentially require additional modifications or adjustments.

2. Installation complexity: Installing a new CNF requires some mechanical knowledge and tools, which could add to the overall cost and time investment.

3. Potential for additional repairs: If the CNF was failing due to a larger issue within the cooling system, replacing the CNF alone may not solve the problem, and additional repairs may be necessary.

In conclusion, while the cost and installation complexity are potential downsides, the benefits of a new CNF, such as improved cooling system performance and peace of mind, often outweigh the cons. If you're experiencing issues with your Corolla's cooling system, it's essential to address the problem promptly to prevent further damage and ensure the longevity of your vehicle.

Recommendation:

Consider researching various suppliers for both OEM and aftermarket CNF options. Compare prices, reviews, and warranty information to find the best value for your investment. If you're not confident in your ability to install the part yourself, consider hiring a professional mechanic to ensure the job is done correctly.

Details:

Direct Replacement. Disconnect the transmission cooling lines from bottom of Radiator. Warranty:1 Year limited. Connect the engine cooling hoses to Radiator.

Installation guidelines provided in the box. Disconnect the battery. Tools need to be prepared: Screwdrivers, Wrenches, Drain pan. Maximum cooling efficiency and perfect fit.

OE design to ensure exact fit, form and function for an easy drop-in installation. Core Material: Aluminum. A damaged Radiator cooling fan is a determining factor in preventing your car from overheating. Easy Installation.

Fill the Radiator with fluid. Connect any clamps or brackets that hold the Radiator in place. Replace the fan and shroud. Cooling Fan and Radiator Condenser Assembly For 2014 2015 Toyota Corolla 1.8L Fits.

The fan clutch and water pump are also connected by the same shaft. The Radiator cooling fan does this by either pulling or pushing air into the keeping temperatures within safe levels. Remove any clamps, brackets, or screws holding the Radiator inside its frame. Take off any plastic covers around the Radiator.

Newly Listed. Disconnect the Radiator hoses from. Lift the Radiator up and out of car. Radiator Notes.

Quantity: 1pcs Radiator. Disconnect the electrical connector to fan, and unbolt remove fan assembly. Remove the old Radiator. It is recommended to replace your Radiator Fan Clutch Water Pump at the same time.

2.The compressor draws in the lower pressure working fluid vapor from evaporator, causes to rise, and then sends it condenser, which is condensed into a higher liquid throttled after throttling valve becomes. Tank Material: Plastic. Premium OE hardware and fittings included in every box. Leak-tested aftermarket Radiator.

The two parts age at the same rate so if one has failed, other is probably not far behind. After the low liquid is sent to evaporator, it absorbs heat in evaporator and evaporates become a lower pressure steam, thereby completing refrigeration cycle. 1.Such condensers typically also use a fan to force air through the heat sink and away from tropics. Drain the Radiator fluid into a suitable container.

High flow design provides long lasting, efficient cooling, Factory lubricated for life, Precision ground shaft and hub accept fan clutches perfectly, Quality forged housing is specially formed to ensure maximum coolant flow, built balanced - Pressed on impeller increases water Unitized seal protects bearings Provides life leak free performance. To prevent premature failure of your new unit, it is wise to replace both at the same time. Connect the transmission cooling lines carefully. How to replace a new Radiator.

Add detergent if the tank is too full can take some antifreeze. Install the new Radiator. Reconnect the fan electrical connection. Slide the new Radiator into place.

When one part fails it typically affects the operation of other. Information About AC Condenser. Replace the plastic covers.

specifications shroudshell:

  • for models: Corolla
  • for makes: Toyota
  • for years: 2014-2015
  • brand: Ignition
  • manufacturer part number: IG848329CO
  • fitment type: Direct Replacement
  • manufacturer warranty: 1 Year
  • custom bundle: No
  • placement on vehicle: Front
  • type: Cooling Fan And Radiator Condenser
  • listing include: 1x Cooling Fan, 1x Radiator, 1x Condenser
  • voltage: 12v
  • fan type: Radiator Cooling Fan Assembly
  • fan placement on vehicle: Driver Side/lh
  • radiator height inch : 31.6365
  • radiator width inch : 19.4535
  • radiator thickness inch : 6.288
  • condenser height inch : 24.7244094488189
  • condenser width inch : 15.2755905511811
  • condenser thickness inch : 0.62992125984252
  • condenser material: Aluminum
  • radiator tank material: Plastic
  • radiator weight lbs : 3.32kg
  • transmission inlet fitting design condenser : Block
  • radiator core type: Crossflow
  • condenser core type: Parallel Flow Condenser
  • condneser inlet diameter: 0.61
  • radiator inlet diameter: 1.375
  • condenser outlet diameter: 0.4

general shroudshell:

  • Car Truck Parts Accessories > Engine Cooling Components > Fan Shroud Assemblies
  • condition: New

payments shroudshell:

  • wallet: Google-pay
  • credit card: Mastercard
  • other

seller shroudshell:

  • rating: 99.4%
  • # reviews: 117625
  • city: Ontario, California

returns shroudshell:

  • time: 30 Days
  • paid by: Seller
  • policy: Returns Accepted

shipping shroudshell:

  • carrier: FedEx
  • service: FedEx Ground Economy
  • class: Economy
  • transit: 4-9 Days
  • type: Fixed
  • cost: $0.00

offer shroudshell:

  • sold: 0
  • quantity: 5
  • availability: In Stock
  • started: November 11, 2025
  • options: Ship-to-home
for models: corolla, for makes: toyota, for years: 2014-2015, fitment type: direct replacement, manufacturer warranty: 1 year, custom bundle: no, placement on vehicle: front, type: cooling fan and radiator condenser, listing include: 1x cooling fan, 1x radiator, 1x condenser, voltage: 12v, fan type: radiator cooling fan assembly, fan placement on vehicle: driver side/lh, radiator height inch: 31.6365, radiator width inch: 19.4535, radiator thickness inch: 6.288, condenser height inch: 24.7244094488189, condenser width inch: 15.2755905511811, condenser thickness inch: 0.62992125984252, condenser material: aluminum, radiator tank material: plastic, radiator weight lbs: 3.32kg, transmission inlet fitting design condenser: block, radiator core type: crossflow, condenser core type: parallel flow condenser, condneser inlet diameter: 0.61, radiator inlet diameter: 1.375, condenser outlet diameter: 0.4,
category: auto parts > car truck parts accessories > engine cooling components > fan shroud assemblies, sku: 9929262767202752,

Ignition IG848329CO Is Similar To:

Copyright © shroudshell.com