1. Fan & Shroud Assemblies Offers
  2. sku: 6954081894692762
  3. IGNITION IG848326CO

IGNITION IG848326CO Cooling Fan Radiator Condenser 2.4L

fits model: Xb. make: Scion. year: 2009–2015.

Ig848326co Ignition Cooling Fan And Radiator Condenser Assembly For 2008 2009-2015 Scion Xb 2.4l

( Brand: Ignition ), ( Manufacturer Part Number: IG848326CO ), ( Fitment Type: Direct Replacement ), ( Manufacturer Warranty: 1 Year ), ( Custom Bundle: No ), ( Placement On Vehicle: Front ), ( Type: Cooling Fan And Radiator Condenser ), ( Listing Include: 1x Cooling Fan, 1x Radiator, 1x Condenser ), ( Voltage: 12v ), ( Fan Type: Radiator Condneser Cooling Fan Assembly ), ( Fan Placement On Vehicle: Driver Passenger Side/lh Rh ), ( Condenser Height Inch : 24.7244094488189 ), ( Condenser Width Inch : 15.2755905511811 ), ( Condenser Thickness Inch : 0.62992125984252 ), ( Condenser Material: Aluminum ), ( Radiator Tank Material: Plastic ), ( Transmission Inlet Fitting Design Condenser : Block ), ( Condenser Core Type: Parallel Flow Condenser ), ( Condneser Inlet Diameter: 0.61 ), ( Condenser Outlet Diameter: 0.4 )

Review IGNITION Cooling Fan And Radiator Condenser Assembly 2008 Scion 2.4l fits XB 2009–2015

Ignition IG848326 CO Cooling Fan Radiator Condenser for 2008-2015 Scion xB 2.4L

Description:

The Ignition IG848326 CO cooling fan radiator condenser is an essential component of your Scion xB's cooling system. Designed specifically for 2008-2015 Scion xB models equipped with a 2.4L engine, this cooling fan radiator condenser ensures optimal engine performance and temperature regulation.

This high-quality cooling fan radiator condenser boasts a robust and durable construction, featuring a premium composite core that enhances cooling efficiency while reducing weight. The condenser is engineered with a sophisticated design that allows for efficient heat exchange between the cooling liquid and the outside air.

The cooling fan radiator condenser comes with a pre-installed fan and clutch assembly, which helps maintain proper engine temperature during various driving conditions. The fan is designed to run at optimal speed, ensuring that air flows through the cooling system efficiently, keeping the engine cooled down.

The Ignition IG848326 CO cooling fan radiator condenser is manufactured to meet or exceed OEM specifications, ensuring a perfect fit and flawless integration with your Scion xB's cooling system. Installation is straightforward, making it an excellent choice for DIY enthusiasts or professional mechanics.

Upgrading to the Ignition IG848326 CO cooling fan radiator condenser offers several benefits, including improved cooling efficiency, enhanced durability, and extended component life. By maintaining proper engine temperature, you'll not only ensure the longevity of your Scion xB's engine but also enjoy a smoother driving experience.

In summary, the Ignition IG848326 CO cooling fan radiator condenser is a must-have upgrade for any 2008-2015 Scion xB 2.4L owner seeking improved cooling performance, durability, and engine longevity. Trust Ignition to deliver a high-quality, reliable, and effective cooling solution for your Scion xB.

Buying a New Cooling Fan Radiator Condenser for a 2008-2015 Scion xB 2.4L: Pros, Cons, and Recommendation

The cooling fan radiator condenser is a crucial component of your Scion xB's engine cooling system. When considering a replacement, it's essential to evaluate both the pros and cons of purchasing a new one. In this context, we will discuss the IG848326CO part by ACDelco, which is a suitable replacement for the cooling fan radiator condenser in 2008-2015 Scion xB 2.4L vehicles.

Pros:

1. OE (Original Equipment) Quality: ACDelco's IG848326CO is an OE-replacement part, which means it is manufactured to meet the same specifications as the original equipment.

2. Durability: ACDelco's cooling fan radiator condenser is designed with high-quality materials, ensuring long-lasting performance and reliability.

3. Compatibility: The IG848326CO is specifically engineered to fit and function correctly in 2008-2015 Scion xB 2.4L vehicles.

4. Warranty: ACDelco offers a limited warranty on their cooling fan radiator condenser, giving customers peace of mind and protection against manufacturing defects.

Cons:

1. Cost: The IG848326CO is a premium replacement part and may be more expensive than aftermarket alternatives. However, its OE quality and durability make it a worthwhile investment.

2. Availability: Depending on the location and supplier, it might take some time to source and receive the part.

Conclusion:

When deciding to buy a new cooling fan radiator condenser for your 2008-2015 Scion xB 2.4L, consider the advantages and disadvantages of purchasing a high-quality, OE-replacement part from ACDelco. Although the part may have a higher upfront cost compared to aftermarket alternatives, its durability, compatibility, and OE quality make it a sound investment that can save you time and money in the long run.

Recommendation:

If you prioritize the reliability and longevity of your engine cooling system, it is recommended that you invest in a premium OE-replacement cooling fan radiator condenser, such as ACDelco's IG848326CO. By choosing a high-quality part, you can ensure your Scion xB continues to run efficiently and effectively while maintaining its value.

Details:

High flow design provides long lasting, efficient cooling, Factory lubricated for life, Precision ground shaft and hub accept fan clutches perfectly, Quality forged housing is specially formed to ensure maximum coolant flow, built balanced - Pressed on impeller increases water Unitized seal protects bearings Provides life leak free performance. Warranty:1 Year limited. Disconnect the transmission cooling lines from bottom of Radiator. Premium OE hardware and fittings included in every box.

Take off any plastic covers around the Radiator. Easy Installation. 1.Such condensers typically also use a fan to force air through the heat sink and away from tropics. Slide the new Radiator into place.

After the low liquid is sent to evaporator, it absorbs heat in evaporator and evaporates become a lower pressure steam, thereby completing refrigeration cycle. 2.The compressor draws in the lower pressure working fluid vapor from evaporator, causes to rise, and then sends it condenser, which is condensed into a higher liquid throttled after throttling valve becomes. When one part fails it typically affects the operation of other. Connect the engine cooling hoses to Radiator.

Drain the Radiator fluid into a suitable container. Add detergent if the tank is too full can take some antifreeze. Disconnect the battery. Newly Listed.

Replace the plastic covers. Tank Material: Plastic. Remove the old Radiator. Remove any clamps, brackets, or screws holding the Radiator inside its frame.

The two parts age at the same rate so if one has failed, other is probably not far behind. Reconnect the fan electrical connection. It is recommended to replace your Radiator Fan Clutch Water Pump at the same time. Maximum cooling efficiency and perfect fit.

Connect the transmission cooling lines carefully. Information About AC Condenser. Leak-tested aftermarket Radiator. Cooling Fan and Radiator Condenser Assembly For 2008 2009 2015 Scion xB 2.4L Fits.

2008 2015 Scion xB 2.4L. How to replace a new Radiator. Lift the Radiator up and out of car. The Radiator cooling fan does this by either pulling or pushing air into the keeping temperatures within safe levels.

Installation guidelines provided in the box. Disconnect the Radiator hoses from. Core Material: Aluminum. Replace the fan and shroud.

Install the new Radiator. Tools need to be prepared: Screwdrivers, Wrenches, Drain pan. Radiator Notes. Quantity: 1pcs Radiator.

Connect any clamps or brackets that hold the Radiator in place. Direct Replacement. OE design to ensure exact fit, form and function for an easy drop-in installation. Disconnect the electrical connector to fan, and unbolt remove fan assembly.

A damaged Radiator cooling fan is a determining factor in preventing your car from overheating. The fan clutch and water pump are also connected by the same shaft. Fill the Radiator with fluid. To prevent premature failure of your new unit, it is wise to replace both at the same time.

specifications shroudshell:

  • for models: Xb
  • for makes: Scion
  • for years: 2009-2015
  • brand: Ignition
  • manufacturer part number: IG848326CO
  • fitment type: Direct Replacement
  • manufacturer warranty: 1 Year
  • custom bundle: No
  • placement on vehicle: Front
  • type: Cooling Fan And Radiator Condenser
  • listing include: 1x Cooling Fan, 1x Radiator, 1x Condenser
  • voltage: 12v
  • fan type: Radiator Condneser Cooling Fan Assembly
  • fan placement on vehicle: Driver Passenger Side/lh Rh
  • condenser height inch : 24.7244094488189
  • condenser width inch : 15.2755905511811
  • condenser thickness inch : 0.62992125984252
  • condenser material: Aluminum
  • radiator tank material: Plastic
  • transmission inlet fitting design condenser : Block
  • condenser core type: Parallel Flow Condenser
  • condneser inlet diameter: 0.61
  • condenser outlet diameter: 0.4

offer shroudshell:

  • quantity: 5
  • availability: In Stock
  • options: Ship-to-home
  • started: June 19, 2025
  • sold: 0

returns shroudshell:

  • time: 30 Days
  • paid by: Seller
  • policy: Returns Accepted

payments shroudshell:

  • credit card: Discover
  • other
  • wallet: Paypal

seller shroudshell:

  • rating: 98.9%
  • city: Ontario, California
  • # reviews: 105689

general shroudshell:

  • condition: New
  • Car Truck Parts Accessories > Engine Cooling Components > Fan Shroud Assemblies

shipping shroudshell:

  • carrier: FedEx
  • class: Economy
  • service: FedEx Ground Economy
  • cost: $0.00
  • type: Fixed
  • transit: 5-8 Days
for models: xb, for makes: scion, for years: 2009-2015, fitment type: direct replacement, manufacturer warranty: 1 year, custom bundle: no, placement on vehicle: front, type: cooling fan and radiator condenser, listing include: 1x cooling fan, 1x radiator, 1x condenser, voltage: 12v, fan type: radiator condneser cooling fan assembly, fan placement on vehicle: driver passenger side/lh rh, condenser height inch: 24.7244094488189, condenser width inch: 15.2755905511811, condenser thickness inch: 0.62992125984252, condenser material: aluminum, radiator tank material: plastic, transmission inlet fitting design condenser: block, condenser core type: parallel flow condenser, condneser inlet diameter: 0.61, condenser outlet diameter: 0.4,
category: auto parts > car truck parts accessories > engine cooling components > fan shroud assemblies, sku: 6954081894692762,

Ignition IG848326CO Is Similar To:

Copyright © shroudshell.com