1. Fan & Shroud Assemblies Offers
  2. sku: 7070195201989652
  3. IGNITION IG837593CO

IGNITION IG837593CO Engine Ac Condenser Cooling Fan

fits model: Cr, Cr-v, Element. make: Honda.

Ig837593co Ignition Engine Ac Condenser And Cooling Fan Assembly For Honda Element Cr-v

( Brand: Ignition ), ( Manufacturer Part Number: IG837593CO ), ( Fitment Type: Direct Replacement ), ( Manufacturer Warranty: 1 Year ), ( Custom Bundle: No ), ( Placement On Vehicle: Front ), ( Type: Ac Condenser And Cooling Fan ), ( Listing Include: 1x Condenser, 1x Cooling Fan ), ( Voltage: 12v ), ( Cooling Fan Cfm: 2400 ), ( Cooling Fan Rpm: 1950 ), ( Cooling Fandraw: 9.6 ), ( Condenser Height Inch : 14.92 ), ( Condenser Width Inch : 26.93 ), ( Condenser Thickness Inch : 0.63 )

Review IGNITION Engine Ac Condenser And Cooling Fan Assembly Honda fits ELEMENT CR CR-V

The IG837593CO engine cooling fan, manufactured by Ignition, is a crucial component in the cooling system of Honda Element and CR-V models. This fan ensures optimal engine performance and temperature regulation by circulating cool air through the engine condenser when the vehicle's air conditioning (A/C) system is in use.

Measuring approximately 14 inches in diameter and 9 inches in height, this fan features a robust and efficient design. It boasts six forward and two reverse blades that enable it to circulate air effectively. The fan motor is designed for longevity, with a continuous operating speed of 2900 RPM and a peak speed of 3300 RPM.

The fan housing is made of durable, engineered thermoplastic material that is resistant to corrosion and heat. The fan is also equipped with a thermal sensor that activates the fan when the engine temperature reaches a certain threshold. This ensures proper engine temperature regulation, maintaining an ideal environment for optimal engine performance.

The IG837593CO engine cooling fan is a direct replacement for the original equipment (OE) fan in Honda Element and CR-V models. It comes with all necessary mounting hardware for an easy installation process. Additionally, it complies with all relevant emissions and safety standards, ensuring that it not only performs effectively but also meets the highest safety and environmental requirements.

In summary, the Ignition IG837593CO engine cooling fan is a high-performance and reliable component designed specifically for Honda Element and CR-V models. It ensures optimal engine temperature regulation while circulating cool air through the engine condenser during A/C usage. With its robust design, thermal sensor, and easy installation process, this fan is an excellent choice for those seeking to enhance their vehicle's cooling system performance.

Buying a new ignition coil, AC condenser, and cooling fan (part number: IG837593CO) for a Honda Element or CR-V can address various issues related to the vehicle's engine cooling system and electrical ignition system. Here are some potential pros and cons to consider before making this purchase:

Pros:

1. Improved Engine Performance: A faulty ignition coil can cause misfires, reduced fuel economy, and decreased engine performance. By replacing it, you can ensure optimal ignition system performance.

2. Enhanced AC System: A failed AC condenser can result in a lack of cold air coming from the vehicle's air conditioning system. Replacing it can help restore your vehicle's cooling capabilities.

3. Preventing Overheating: A malfunctioning cooling fan can lead to overheating, which can cause severe damage to your engine. Replacing the cooling fan can prevent such issues.

4. Longer Vehicle Life: Regularly replacing worn-out parts can help extend the life of your vehicle and minimize the need for costly repairs in the future.

5. Convenience: By purchasing the IG837593CO kit, you can replace all three components at once, saving time and potential labor costs compared to replacing them separately.

Cons:

1. Cost: The cost of purchasing a new ignition coil, AC condenser, and cooling fan as a kit can be more expensive than replacing each part individually.

2. Installation Complexity: Depending on your mechanical skills and experience, installing these components may require professional assistance, adding to the overall cost.

3. Availability: It may be challenging to find this specific part number for your particular Honda Element or CR-V model at your local auto parts store, requiring you to order it online.

In conclusion, investing in a new ignition coil, AC condenser, and cooling fan (IG837593CO) for your Honda Element or CR-V can help improve engine performance, restore AC system functionality, and prevent overheating. While the upfront cost may be higher compared to replacing each component individually, the potential benefits and convenience of addressing multiple issues at once can make this an attractive option for some vehicle owners. Ultimately, the decision to purchase this kit depends on your budget, mechanical skills, and the specific needs of your vehicle. If you're experiencing issues with any of these components, it's essential to address them promptly to ensure the continued safe and reliable operation of your Honda Element or CR-V.

Details:

Fits: 2002 2006 Honda CR-V 2003 2006 Element Features: Easy Installation High flow design provides long lasting, efficient cooling Factory lubricated for life Precision ground shaft and hub accept fan clutches perfectly Quality forged housing is specially formed to ensure maximum coolant built balanced - Pressed on impeller increases water Unitized seal protects bearings Provides leak free performance. Newly Listed. To prevent premature failure of your new unit, it is wise to replace both at the same time. After the low liquid is sent to evaporator, it absorbs heat in evaporator and evaporates become a lower pressure steam, thereby completing refrigeration cycle.

2.The compressor draws in the lower pressure working fluid vapor from evaporator, causes to rise, and then sends it condenser, which is condensed into a higher liquid throttled after throttling valve becomes. The fan clutch and water pump are also connected by the same shaft. A damaged radiator cooling fan is a determining factor in preventing your car from overheating. When one part fails it typically affects the operation of other.

Information About AC Condenser. The two parts age at the same rate so if one has failed, other is probably not far behind. The radiator cooling fan does this by either pulling or pushing air into the keeping temperatures within safe levels. 1.Such condensers typically also use a fan to force air through the heat sink and away from tropics.

It is recommended to replace your Radiator Fan Clutch Water Pump at the same time. Engine AC Condenser and Cooling Fan Assembly For Honda Element CR-V Fits.

part #: ig837593co price

  • $93.98

specifications shroudshell:

  • for models: Cr, Cr-v, Element
  • for makes: Honda
  • brand: Ignition
  • manufacturer part number: IG837593CO
  • fitment type: Direct Replacement
  • manufacturer warranty: 1 Year
  • custom bundle: No
  • placement on vehicle: Front
  • type: Ac Condenser And Cooling Fan
  • listing include: 1x Condenser, 1x Cooling Fan
  • voltage: 12v
  • cooling fan cfm: 2400
  • cooling fan rpm: 1950
  • cooling fandraw: 9.6
  • condenser height inch : 14.92
  • condenser width inch : 26.93
  • condenser thickness inch : 0.63

returns shroudshell:

  • policy: Returns Accepted
  • time: 30 Days
  • paid by: Seller

offer shroudshell:

  • sold: 0
  • started: June 24, 2025
  • options: Ship-to-home
  • availability: In Stock
  • quantity: 5

general shroudshell:

  • Car Truck Parts Accessories > Engine Cooling Components > Fan Shroud Assemblies
  • condition: New

seller shroudshell:

  • rating: 98.9%
  • city: Ontario, California
  • # reviews: 105818

shipping shroudshell:

  • cost: $0.00
  • transit: 3-7 Days
  • service: FedEx Ground Economy
  • class: Economy
  • type: Fixed
  • carrier: FedEx

payments shroudshell:

  • wallet: Paypal
  • other
  • credit card: Visa
for models: cr, cr-v, element, for makes: honda, fitment type: direct replacement, manufacturer warranty: 1 year, custom bundle: no, placement on vehicle: front, type: ac condenser and cooling fan, listing include: 1x condenser, 1x cooling fan, voltage: 12v, cooling fan cfm: 2400, cooling fan rpm: 1950, cooling fandraw: 9.6, condenser height inch: 14.92, condenser width inch: 26.93, condenser thickness inch: 0.63,
category: auto parts > car truck parts accessories > engine cooling components > fan shroud assemblies, sku: 7070195201989652,

Ignition IG837593CO Is Similar To:

shroudshell logo
1 offer $93.98 USD
  • New. Offer #1 priced at $93.98 + $0.00 delivery = $93.98* total. Fits: 2002-2006 Honda CR-V 2003-2006 Honda Element Features: Easy Installation High flow design provides long lasting, efficient cooling Factory lubricated for long life Precision ground shaft and hub accept fan clutches perfectly Quality forged housing is specially formed to ensure maximum coolant flow Precision built and balanced - Pressed on impeller increases water flow Unitized seal protects bearings - Provides long life and leak free performance.FREE SHIPPING

Copyright © shroudshell.com