1. Fan & Shroud Assemblies Offers
  2. sku: 8867963966504762
  3. IGNITION IG837500CO

IGNITION IG837500CO Engine Radiator Cooling Fan Kit 04-2007

fits model: Lancer. make: Mitsubishi. year: 2005–2007.

Ig837500co Ignition Engine Radiator And Cooling Fan Kit For 2003 2004 2005-2007 Mitsubishi Lancer

( Brand: Ignition ), ( Manufacturer Part Number: IG837500CO ), ( Fitment Type: Direct Replacement ), ( Manufacturer Warranty: 1 Year ), ( Custom Bundle: No ), ( Placement On Vehicle: Front ), ( Type: Radiator And Cooling Fan ), ( Ipn: 04-2007 ), ( Listing Include: 1x Radiator, 1x Cooling Fan ), ( Voltage: 12v ), ( Cooling Fan Plug Pin Number: 2/2 ), ( Cooling Fan Rpm: 2200/2050 ), ( Cooling Fandraw: 8/7 ), ( Radiator Height Inch : 27.09 ), ( Radiator Width Inch : 14.76 ), ( Radiator Thickness Inch : 0.63 )

Review IGNITION Engine Radiator And Cooling Fan Kit 2003 2004 Mitsubishi fits LANCER 2005–2007

Introducing the Ignition IG837500CO Engine Radiator Cooling Fan Kit, specifically designed for Mitsubishi Lancer models produced between 2003 and 2007. This fan kit is an excellent choice for those seeking reliable and efficient cooling performance for their vehicles.

The Ignition IG837500CO fan kit comes with a high-performance cooling fan that is capable of maintaining optimal engine temperature under various driving conditions. The fan features a powerful and quiet DC motor, ensuring cool air is circulated effectively while minimizing noise levels. The fan blades are engineered for maximum airflow, allowing for efficient cooling even during heavy traffic or uphill driving.

The fan kit also includes a temperature sensor, which allows the fan to activate and deactivate based on engine temperature. This results in reduced strain on the engine and improved fuel efficiency. The fan kit is designed to be a direct replacement for your original equipment, ensuring a seamless installation process.

The Ignition IG837500CO cooling fan kit is constructed from high-quality materials, including rust-resistant aluminum for the fan housing and durable rubber fan mounts. These materials not only ensure long-lasting performance but also provide protection against corrosion and wear.

Installation of the fan kit is made easy with included mounting hardware and clear installation instructions. The fan kit is also compatible with most factory wiring harnesses, eliminating the need for additional wiring modifications.

In summary, the Ignition IG837500CO Engine Radiator Cooling Fan Kit is an excellent investment for Mitsubishi Lancer owners seeking reliable and efficient cooling performance. With its powerful and quiet DC motor, high-performance fan blades, temperature sensor, and durable materials, this fan kit is designed to provide optimal cooling for your vehicle while ensuring a seamless installation process.

Pros and Cons of buying a IG837500CO Engine Radiator Cooling Fan Kit for Select Mitsubishi Lancer Models (2003-2007)

1. Pros:

a. Direct Fit: This fan kit is designed specifically for Mitsubishi Lancer models between 2003 and 2007, ensuring a perfect fit and easy installation.

b. Improved Cooling: The new cooling fan can help maintain optimal engine temperature, preventing overheating and potential damage to the engine.

c. Durability: The fan kit is engineered to be robust and long-lasting, reducing the need for frequent replacements.

d. OEM Quality: The IG837500CO fan kit is an original equipment manufacturer (OEM) replacement, ensuring reliability and compatibility with your vehicle.

2. Cons:

a. Price: Compared to some aftermarket options, the OEM replacement fan kit may be more expensive.

b. Availability: Depending on your location, this specific fan kit may not be readily available at local auto parts stores, requiring an online purchase.

In conclusion, the IG837500CO Engine Radiator Cooling Fan Kit for select Mitsubishi Lancer models (2003-2007) offers several benefits, including a perfect fit, improved cooling, durability, and OEM quality. However, it may come with a higher price tag compared to some aftermarket alternatives and could have limited availability in local auto parts stores.

Based on the information provided, the recommendation would be to consider the importance of having an OEM quality, direct-fit cooling fan that ensures optimal engine temperature and durability. If the price and availability are not major concerns, then purchasing the IG837500CO Engine Radiator Cooling Fan Kit for your Mitsubishi Lancer (2003-2007) would be a wise investment.

Details:

Drain the radiator fluid into a suitable container. Disconnect the battery. The radiator cooling fan does this by either pulling or pushing air into the keeping temperatures within safe levels. A damaged radiator cooling fan is a determining factor in preventing your car from overheating.

Tank Material: Plastic. Add detergent if the tank is too full can take some antifreeze. When one part fails it typically affects the operation of other. High flow design provides long lasting, efficient cooling, Factory lubricated for life, Precision ground shaft and hub accept fan clutches perfectly, Quality forged housing is specially formed to ensure maximum coolant flow, built balanced - Pressed on impeller increases water Unitized seal protects bearings Provides life leak free performance.

Quantity: 1pcs Radiator. Lift the radiator up and out of car. How to replace a new radiator. OE design to ensure exact fit, form and function for an easy drop-in installation.

To prevent premature failure of your new unit, it is wise to replace both at the same time. Easy Installation. Slide the new radiator into place. Take off any plastic covers around the radiator.

Direct Replacement. Premium OE hardware and fittings included in every box. Replace the plastic covers. Engine Radiator and Cooling Fan Kit For 2003 2004 2005 2007 Mitsubishi Lancer Fits.

2003 2007 Mitsubishi Lancer. Warranty:1 Year limited. It is recommended to replace your Radiator Fan Clutch Water Pump at the same time. Installation guidelines provided in the box.

The fan clutch and water pump are also connected by the same shaft. Connect any clamps or brackets that hold the radiator in place. Replace the fan and shroud. Disconnect the electrical connector to fan, and unbolt remove fan assembly.

Core Material: Aluminum. Fill the radiator with fluid. The two parts age at the same rate so if one has failed, other is probably not far behind. Tools need to be prepared: Screwdrivers, Wrenches, Drain pan.

Connect the engine cooling hoses to radiator. Maximum cooling efficiency and perfect fit. Newly Listed. Disconnect the radiator hoses from.

Remove the old radiator. Radiator Notes. Disconnect the transmission cooling lines from bottom of radiator. Install the new radiator.

Reconnect the fan electrical connection. Remove any clamps, brackets, or screws holding the radiator inside its frame. Leak-tested aftermarket radiator. Connect the transmission cooling lines carefully.

part #: ig837500co prices

  • $68.59-$122.97

specifications shroudshell:

  • for models: Lancer
  • for makes: Mitsubishi
  • for years: 2005-2007
  • brand: Ignition
  • manufacturer part number: IG837500CO
  • fitment type: Direct Replacement
  • manufacturer warranty: 1 Year
  • custom bundle: No
  • placement on vehicle: Front
  • type: Radiator And Cooling Fan
  • interchange part number: 04-2007
  • listing include: 1x Radiator, 1x Cooling Fan
  • voltage: 12v
  • cooling fan plug pin number: 2/2
  • cooling fan rpm: 2200/2050
  • cooling fandraw: 8/7
  • radiator height inch : 27.09
  • radiator width inch : 14.76
  • radiator thickness inch : 0.63

general shroudshell:

  • condition: New
  • Car Truck Parts Accessories > Engine Cooling Components > Fan Shroud Assemblies

returns shroudshell:

  • paid by: Seller
  • policy: Returns Accepted
  • time: 30 Days

shipping shroudshell:

  • carrier: FedEx
  • service: FedEx Ground Economy
  • transit: 3-7 Days
  • class: Economy
  • cost: $0.00
  • type: Fixed

payments shroudshell:

  • other
  • credit card: Discover
  • wallet: Apple-pay

seller shroudshell:

  • city: Ontario, California
  • # reviews: 109422
  • rating: 98.9%

offer shroudshell:

  • options: Ship-to-home
  • started: September 16, 2025
  • availability: In Stock
  • quantity: 1
  • sold: 0
for models: lancer, for makes: mitsubishi, for years: 2005-2007, fitment type: direct replacement, manufacturer warranty: 1 year, custom bundle: no, placement on vehicle: front, type: radiator and cooling fan, listing include: 1x radiator, 1x cooling fan, voltage: 12v, cooling fan plug pin number: 2/2, cooling fan rpm: 2200/2050, cooling fandraw: 8/7, radiator height inch: 27.09, radiator width inch: 14.76, radiator thickness inch: 0.63,
category: auto parts > car truck parts accessories > engine cooling components > fan shroud assemblies, sku: 8867963966504762,

Ignition IG837500CO Is Similar To:

shroudshell logo
5 offers $68.59–$122.97 USD
  • New. Offer #1 priced at $68.59 + $0.00 delivery = $68.59* total. 20 Dodge Ram 1500 4.7L V8. Ignition Coil.FREE SHIPPING
  • New. Offer #2 priced at $122.97 + $0.00 delivery = $122.97* total. 2004-10 Infiniti QX56 V8 5.6L Ignition Coil Kit. 2005-15 Nissan Armada V8 5.6L (excluding Flex Fuel) Ignition Coil Kit.FREE SHIPPING
  • New. Offer #3 priced at $69.99 + $0.00 delivery = $69.99* total. FREE SHIPPING
  • New. Offer #4 priced at $122.97 + $0.00 delivery = $122.97* total. FREE SHIPPING
  • New. Offer #5 priced at $26.99 + $0.00 delivery = $26.99* total. 100% Factory tested Package : 1X CDI BOX Fits for:.FREE SHIPPING

Copyright © shroudshell.com